By Academic Program/FoS:

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

		1
			Title:	Bleaching comparison on acacia kraft pulp produced from continuous and batch cooking system
			Author:	Lasmaretty, Itsna Lathifah
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		2
			Title:	Bleaching of old newspapers and magazines (ONP and OMG) with hydrogen per oxide
			Author:	Badruzzaman, Kazi
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		3
			Title:	Calcium and iron fortification of rice flour and noodles
			Author:	Chutiwan Boonyanipat
			Academic Program/FoS:	Postharvest and Food Process Engineering (PH)

		4
			Title:	Characteristics of frayed fiber and its role as a reinforcement pulp
			Author:	Yang, Xuelian
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		5
			Title:	Characterization and removal of resin from mixed tropical hardwood pulp
			Author:	Han, Ying
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		6
			Title:	Characterization of lipophilic extractives in Acacia mangium wood and pulp - deresination in chemical pulping
			Author:	Joshi, Lalita
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		7
			Title:	Characterization of some Asian OCC pulp
			Author:	Yuan, Gao
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		8
			Title:	Characterization of the specialty pulp from leaf fiber (Sisal and Abaca) for specialty paper
			Author:	Suebthip Pongpaiboon
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		9
			Title:	Characterizing the fractionation capacity of laboratory pressure screens
			Author:	Yu, Hong-yan
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		10
			Title:	Chemical additives and surfactants on kraft pulping of E. camaldulensis
			Author:	Hasan, Md. Jabed
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		11
			Title:	Chinese non-wood pulps and potential of wheat straw pulp for making high quality paper
			Author:	Fan, Li
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		12
			Title:	Chloride and potassium distribution in modern kraft recovery boiler
			Author:	Sarawut Jetinai
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		13
			Title:	Comparative evaluation of soymilk drying in a spray dryer and spouted bed of inert particles
			Author:	Pilairuk Boonyai
			Academic Program/FoS:	Postharvest and Food Process Engineering (PH)

		14
			Title:	Comparing flexural behavior of cement-bonded fiberboard reinforced bagasse, pine and coconut coir
			Author:	Hoang Van Phong
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		15
			Title:	Comparison of Birch, Eucalyptus and Acacia pulps for offset printing
			Author:	Andy Wibowo Alias Alan Soeparjan
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		16
			Title:	Comparison of ECF and TCF bleaching of Eucalyptus camaldulensis kraft pulp
			Author:	Liu, Xin
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		17
			Title:	Comparison of Eucalyptus camadulensis bleaching results between O-Q-(OP)-Z-Q-(PO) and O-Q-(OP)-Paa-Q-(PO)
			Author:	Sun, Beisong
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		18
			Title:	Comparison of Eucalyptus urophylla, eucalyptus camaldulensis and acacias from Vietnam as fibre raw material for paper
			Author:	Nguyen Hong Minh
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		19
			Title:	Comparison of ammonium zirconium carbonate with other insolubilizers used in paper coating
			Author:	Mou, Zhengran
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		20
			Title:	Comparison of bamboo and Scandinavian softwood as reinforcement pulp using response surface method
			Author:	Seto Ambara
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		21
			Title:	Comparison of mixed and separate cooking of bamboo and Acacia hybrid chips from Vietnam for fine paper
			Author:	Hoang Van Thanh
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		22
			Title:	Comparison of performance of anionic trash catchers on particular anionic trash
			Author:	Gong, Guoping
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		23
			Title:	Comparison of separate and mixed mechanical treatment on acacia kraft, eucalyptus kraft and aspen BCTMP pulps for fine paper
			Author:	Wang, Nianqing
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		24
			Title:	Comparison of the deinking potential of Thai and US newspapers
			Author:	Mayuree Phasuphan
			Academic Program/FoS:	Pulp and Paper Technology (PP)

		25
			Title:	Comparison of two fiber lines using continuous and super-batch cooking system
			Author:	Yang, Jian
			Academic Program/FoS:	Pulp and Paper Technology (PP)

Total 290 Record : 12 Page : << Back [ 1 ] 2 [ 3 ][ 4 ][ 5 ][ 6 ][ 7 ][ 8 ][ 9 ][ 10 ][ 11 ][ 12 ] Next>>